About all

Bonded teeth stains: How to remove stains from teeth bonding?

How to remove stains from teeth bonding?

Dental bonding is a cosmetic dentistry treatment for correcting minor flaws in your smile. It hides imperfections from your smile by fixing issues with your teeth. For example, teeth bonding rectify gaps between teeth, cracks, chips, and discoloration. The procedure also repairs teeth that are worn down, broken, or shorter than average.

Despite its effectiveness, the material used in dental bonding is susceptible to staining. You may have noticed that the parts of your teeth with dental bonding have a different color from your natural teeth. This is because the composite resin material stains easily. It stains due to consuming colored foods and beverages, smoking, or poor oral hygiene.

Naturally, you will want to remove the stains and give your teeth an even shade. However, it might not be possible since stained resin material does not respond to teeth whitening treatments. Here are some methods to help you prevent and remove deep stains on bonded teeth.

Tips to Keep Your Bonded Teeth White

  1. Use a non-abrasive toothpaste with stain removal properties

  2. Using a whitening toothpaste will help keep your teeth white and keep off stains. However, some types of stain-removing toothpaste damage the tooth enamel since they are too abrasive. So avoid using them to brush your teeth. Instead, ask your dentist to recommend toothpaste that lifts away the stains while preserving the enamel.

  3. Maintain proper oral hygiene

  4. Cleaning your teeth properly twice daily and flossing each day will help keep stains from setting on your dental bonding. In addition, routine professional teeth whitening by a dentist will help remove surface stains from the bonded teeth.

  5. Avoid foods that stain the teeth

  6. The bonding material stains easily from the foods and drinks that you take. Therefore keep your teeth from staining by avoiding red wine, coffee, colas, tea, curries, and sauces. Use a drinking straw when taking liquids that may stain your teeth. It helps to minimize their contact with teeth. You can also brush your teeth after consuming teeth-staining substances.

  7. Avoid smoking or vaping

  8. Smoking or vaping stains your teeth bonding a dull yellow, brown, or grey color. The tar and nicotine cause stains to form on your teeth. If your teeth are stained due to cigarette smoke, seek teeth whitening treatments that are not harsh to your gums and teeth.

  9. Visit a dentist regularly for cleaning and check-ups

  10. To keep your teeth whiter, visit the dentist every six months for dental exams and cleanings. The dentist will remove deep stains from your teeth through professional teeth whitening.

    However, deep stains on the dental bonding cannot be removed. Therefore, only surface stains are lifted during the whitening procedure. The only option is for the dentist to remove the bonding and replace them with new ones. This straightforward touch-up procedure is offered at Family Dental Care.

Teeth Bonding Replacement Procedure

This procedure is quite similar to the procedure for fixing new dental bonding. The dental expert will first assess your teeth to determine the extent of discoloration. Next, the dentist will remove the stained dental bonding material from your teeth. This procedure stage requires special techniques and equipment not to damage the teeth structure.

The dentist will then use a shade guide to help choose the dental bonding resin color. A shade that closely matches the color of your natural teeth is picked for uniformity. If you want a brighter smile than the previous one, the dentist will whiten your teeth to the shade you desire.

Next, topical anesthesia is administered. It ensures that you remain comfortable as the dentist prepares your teeth for bonding. The expert will gently roughen the teeth’ surface to prepare them for reapplication of the resin material. Next, a liquid adhesive is applied to each tooth to help the material stick to your tooth enamel.

Finally, the dentist will apply the new material over the part of the tooth the bonding was previously located. This material is molded or shaped to achieve the desired results. It is then hardened using ultraviolet light then shaped to a smooth surface. Finally, the dental professional will polish the dental bonding material. Polishing prevents the rough edges from irritating your tongue and lips.

Dental Bonding Staining – Philadelphia Cosmetic Dentist

Posted on by writeradmin.

I have dental composite bonding on all my front teeth. I have them re-done every three or four years. This latest set is only six months old and is starting to look yellow. Can this be polished to look right again or do I have to re-do them early? What would cause this to happen so quickly?

Priscilla

Dear Priscilla

Whether or not these can be polished to get rid of the stains depends on the nature of the staining itself. Unlike porcelain, which is hard and very stain resistant, composite dental bonding is fairly soft and is susceptible to two different types of staining.

Dental Bonding Staining One

This first type of staining is surface stains. It happens because of tiny scratches on the bonding which allow it to pick up stains that are trapped there. You can tell these front teeth have been scratched because they’ve lost their glossy finish, instead they look matte. If you look at the adjacent natural teeth, they still have a gloss to them.

The good news is this type of staining can be fixed. If your dentist thoroughly polishes them, it will remove the scratches and stains, all while bringing the gloss back.

Dental Bonding Staining Two

Composite bonding is made from a solution of inorganic filler particles such as quartz or glass bound together in a plastic matrix. Because of that, it will absorb stains into its actual material. For instance, if you drink a lot of staining beverages, such as coffee or tea, it will penetrate the plastic and become a part of the bonding structure.

The picture above is a good example of this. Notice the two front teeth are much more stained than the surrounding teeth. This is absorbed staining. You can tell that (as opposed to scratch staining) because the teeth still have their shiny gloss. Notice the adjacent teeth, though stained, aren’t as stained as the bonded teeth. This is because your natural teeth are less susceptible to staining than composite bonding.

Unfortunately, this has to be re-done. There is no way to polish this out. Teeth whitening won’t work either. It will only whiten natural tooth structure. If that is the case, I’m going to highly suggest you switch to porcelain veneers on your teeth. Yes, veneers are more expensive initially. However, you are re-doing these every few years. Great porcelain veneers can last upwards of twenty plus years. They’re much more stain-resistant than bonding. In fact, they’re even more stain-resistant than your natural teeth.

Keeping Dental Bonding Stain-Free

1. Start with the right materials. You want to go to a skilled cosmetic dentist. They are more likely to stock microfill composite. This is possible to get polished completely giving it a high gloss and helping it resist stains.

Most general dentists just keep a generic composite which will never completely polish up to the gloss you need.

2. Avoid abrasive materials. I recommend anyone who has cosmetic work use Supersmile toothpaste. It’s specifically designed to chemically remove stains, instead of doing it with abrasives the way most toothpaste works.

3. Avoid staining beverages. If you must drink them, try not to let it sit on your teeth. Swallow immediately.

4. Make sure your hygienist doesn’t use anything like a prophy jet or pumice on your bonded teeth. It will destroy the glazing.

I hope this helps. Seriously consider switching to porcelain veneers.

This blog is brought to you by Philadelphia Cosmetic Dentist Dr. Michael Weiss.

Let’s figure out what stains on the teeth are and how to maintain an even color of teeth

Even healthy teeth are distinguished by a uniform color of tooth enamel. Stained teeth can be a symptom of a serious illness or cause a cosmetic defect. However, in any case, such acquisitions do not please anyone, and they try to get rid of them as quickly as possible. That’s just to remove stains with toothpaste is impossible.

Causes of appearance

Stains on the teeth may have a different shade, location or size. It all depends on the reason for their appearance. Professional dentists divide such defects into two main groups: carious and non-carious origin. We will consider all cases of occurrence of such an unpleasant defect.

Caries

The most common cause of discoloration of the enamel is the presence of a carious focus. This disease can develop at different rates, but the main cause is demineralization of the enamel and the formation of cavities. Bacteria accumulate in microcracks, which begin to gradually multiply and lead to the destruction of tissues around. Dental caries in the stain stage most often affects children, but also occurs in older adults. Darkening of the enamel with such a disease means the presence of a carious focus inside the crown, since the destruction of tissues is accompanied by a change in color.

Tartar

Discoloration of the enamel can also be caused by active growth of tartar or plaque. A similar problem occurs in adulthood and consists in the accumulation of plaque on the crowns. A stone is a growth on the teeth, which is formed from food particles, microorganisms and salt deposits. Plaque gradually destroys the tooth, so the disease is accompanied by bleeding gums and bad breath. Spots on the teeth can be a symptom of how the stone has reached the limit of growth, and it’s time to visit the dentist to get rid of such a defect.

Fluorosis or lack of fluorine

An external enamel defect often becomes the body’s response to living in a certain area. For example, with the constant use of water with a high concentration of mineral salts, there is a risk of developing fluorosis. This is an excess of fluoride in the body, which is most pronounced in childhood. If milk teeth do not suffer much from such a deficiency, permanent crowns begin to become covered with spots and stripes of different colors.

The opposite situation with a lack of fluoride in the body also leads to the formation of white spots on the teeth. If the body receives insufficient minerals and vitamins, the enamel begins to lose its hardness, which is accompanied by a discoloration. The treatment of such a disease consists in fluoridation to saturate the body with an important component.

The result of drug exposure and chronic diseases

Some drugs change the state of hard tissues – long-term iron intake is reflected precisely in the appearance of such a deficiency. Black spots on the teeth can also indicate the presence of chronic diseases, since all vital systems are closely interconnected. So, anemia, diabetes mellitus and gastrointestinal diseases in almost all cases are accompanied by a change in the shade of the teeth.

Other factors

If you grind your teeth, stains and streaks on crowns can result. The fact is that with such an impact, the tone of the masticatory muscles increases, and each time more and more pressure is exerted on the teeth. As a result, grinding of the enamel and a violation of the solid structure are noted, which leads to the formation of visible defects.

Enamel change also serves as an age-related condition or may be a hereditary trait. If you smoke a lot, abuse wine and coffee, you may also encounter this problem. Some dental injuries may be accompanied by such a symptom, or visible stripes appear on the crown after root canal filling.

The causes of a defect are individual, so a comprehensive diagnosis of teeth is carried out even with such a minor problem. If you went to a dental clinic with a similar problem, the doctor will give an accurate answer only after an examination and a full examination.

Treatment methods

Spotted lesions cannot be removed mechanically as the cause is much deeper. First of all, a comprehensive diagnosis is carried out, since the doctor needs to find out the causes of the appearance. The location, type and number of crowns that have already been destroyed are determined. After that, the exact cause of the color change is established, since the technique largely depends on the cause of the disease. For example, chalky spots on the teeth can signal a lack of mineralization, and it is quite possible to correct such a defect with drugs.

Popular and effective treatments:

  • Microabrosia. This is a method of mechanical removal of visible defects from the crown using instruments or solutions. This technique is used only in some cases and is not suitable for working in the cervical region of the crown. The disadvantage of the method is that it solves problems locally, later the spots may reappear.
  • Filling. If the lesion has become large and has affected most of the crown, a filling is installed. This method also involves the mechanical removal of affected areas and the replacement of tissues with synthetic material.
  • Ceramic veneers. This method is used to obtain a starry and snow-white smile. Thin coatings are made for each crown, which are placed in front and completely cover any defects.
  • Whitening. In order to hide white spots on the surface, you can resort to bleaching and mask the defect. During this procedure, the entire crown is highlighted, so deviations in the form of small light areas become invisible.

Such methods are called aesthetic, and they do not solve the problem of the defect itself. As a rule, such methods are used at the stage when it was possible to completely get rid of the underlying disease. Otherwise, enamel damage continues and often becomes much more noticeable.

An integrated approach to treatment is the development of an individual plan. So, when chalky spots appear in the cervical region, a drug course or several fluoridation procedures are first prescribed. The similar location and type of the most spots indicates a lack of minerals, so the doctor needs to solve this problem first. After the main course of treatment, a method of aesthetic correction is selected, which may consist of bleaching or the installation of fillings.

Our dental clinic is a modern center where effective solutions are practiced individually for each patient. We will conduct a full examination and establish the exact cause of the appearance of stripes on the crowns, select an effective treatment method and tell you about all the features of the impact. Our clinic uses modern equipment, which allows us to accurately determine the cause of the disease. Certified and modern drugs will quickly eliminate deviations from the norm, and experienced doctors will select the best way to restore.

Enamel erosion, what is it, causes of occurrence – Comfort Dentistry

What is dental erosion

Erosion is known as a non-carious disease of the teeth, in which the enamel is gradually destroyed. Distinctive signs of the disease are characteristic white, yellow or brown spots on the front of the teeth and depressions on the surface of the enamel. If the disease is not treated, gradually the destruction will affect not only the outer shell of the tooth, but also the deep layers of tissues. What are the hallmarks of erosion besides changing the color and integrity of the teeth? As the disease progresses, the enamel becomes rough and prone to caries. In addition, there is hyperesthesia of the teeth – sensitivity to cold, hot, sour and sweet. These irritants cause acute short-term pain.

There are three stages of the disease. At the initial stages, only the upper layers of enamel are destroyed, at the second stage, the border of enamel and dentin opens, and at the third stage, damage affects the dentin itself. As a result, the hard tissues of the tooth become thinner and there is a high risk of tooth loss.

Why erosion occurs

It is difficult to answer this question, because there is no unequivocal opinion regarding the causes of enamel erosion. At the same time, doctors are considering several options:

  • Exposure to chemicals. Assumes regular exposure to chemicals. For example, for people who work in production. This also applies to those who often eat carbonated drinks and simple carbohydrates.
  • Mechanical damage. Erosion can be caused by the use of hard toothbrushes or toothpastes with a high level of abrasiveness, which adversely affect the enamel.
  • Malfunctions of the endocrine system. Another possible cause of the disease is disruption of the endocrine system. When diagnosing, ultrasound of the thyroid gland is often prescribed.

How to get rid of the disease

For timely diagnosis of tooth enamel erosion, it is necessary to contact the dentist at least twice a year. The difficulty lies in the fact that this disease can be confused by external signs with fluorosis or the usual hardened plaque as a result of poor oral hygiene. You may also need the help of related specialists – an endocrinologist, a gastroenterologist and others.

During the examination, the dentist directs a stream of air onto the enamel until it dries completely, or applies an iodine solution. So the symptoms of the disease become more pronounced. When the diagnosis is made, the doctor prescribes treatment for erosion of tooth enamel. It could be:

  • remineralizing therapy – local or systemic. Applications containing fluorine, calcium and other missing elements are regularly applied to the affected teeth;
  • gentle whitening – sparing techniques are used, for example, ZOOM 4, at the end of the procedure, I cover the teeth with a protective fluorine-containing varnish;
  • artistic restoration – in case of a significant change in the shape and color of the enamel, the appearance of the jaw is restored using composite materials or veneers.

Depending on the cause of enamel erosion, an additional examination is prescribed and, as a result, more complex treatment. For example, in case of problems in the thyroid gland, hormone therapy may be required.

How to prevent tooth enamel erosion

The first rule is to visit the dentist regularly. Preventive visits are necessary every six months, unscheduled – when the first alarming symptoms appear. Secondly, the right choice of hygiene products, that is, toothpaste and brushes, is important. Pay attention to the level of stiffness of the bristles, it is advisable to take the average. As for the abrasiveness of the paste, products with an RDA of no higher than 80 or 9 are suitable for daily use.0. Finally, don’t forget to use rinses and floss or irrigators for thorough oral hygiene.

If the problem is diagnosed in the early stages, the treatment of enamel erosion will take a minimum of time and will not leave any unpleasant consequences.