About all

Chipped tooth bonding cost: How Much Does Dental Bonding Cost?

How Much Does Dental Bonding Cost?

How Much Does Dental Bonding Cost?Clinical Content Reviewed by Dr. Jay Khorsandi, DDS

Last Modified:

Clinical content featured by Byte is reviewed and fact-checked by a licensed dentist or orthodontist to help ensure clinical accuracy.

We follow strict sourcing guidelines and each page contains a full list of sources for complete transparency.

Table of Contents

  1. What Is Dental Bonding?
  2. Dental Bonding Costs
  3. Bonding Replacement
  4. Paying for Dental Bonding
  5. Frequently Asked Questions
  6. References

Depending on the type of bonding used, why the bonding is being done, the extent of the procedure, and the location, the costs of dental bonding can range from under $100 per tooth to up to nearly $1,000 per tooth. On average, it costs $300 to $600 per tooth.

As a cosmetic procedure, dental bonding is often not covered by dental insurance. There are payment plans and additional options to help offset the costs of the procedure.

What Is Dental Bonding?

Dental bonding involves applying tooth-colored resin to your teeth to improve their appearance. It is a one of the least expensive cosmetic dental procedures that can repair cracked or chipped teeth, change the shape of your teeth, fill gaps, or be used as fillings for a cavity.

With dental bonding, a special composite resin material that is the same color as your teeth is applied to the surface of them. A special UV light is then used to harden the material on your teeth. The procedure is quick and easy, and it requires very little prep or recovery time.

There are several reasons dental bonding can be a good option. It can be used to:

  • Fill cavities in place of the traditional silver fillings.
  • Cover up stained or discolored teeth.
  • Repair cracked or chipped teeth.
  • Fill gaps between teeth.
  • Change the shape of your teeth for cosmetic reasons.
  • Elongate the tooth to cover an exposed tooth root after gum recession.

Most of the time, dental bonding is a cosmetic procedure meant to improve appearance.

Costs Involved in Dental Bonding

On average, dental bonding for cosmetic purposes costs between $300 and $600 per tooth. Prices can range from as low as under $100 per tooth to over $1,000 per tooth, depending on several factors, such as:

  • The location of the tooth being bonded and how difficult to reach it is.
  • The complexity of the procedure needed.
  • The number of teeth involved.
  • The type of bonding needed (a filling or for more cosmetic purposes).
  • The location of the dental office and expertise of the dental professional.

The costs for dental bonding can be highly variable.

Depending on the severity of the issue dental bonding can be done in a single visit, unless you’re having several teeth bonded and it can take between an hour or two.

Bonding Replacement

Dental bonding will need to be replaced after a period of time. It typically lasts about 5 to 10 years, so at some point, it will need to be done again.

Dental bonding is typically less expensive than other options, such as veneers, crowns, or dentures. Even having to redo it after several years can end up being less expensive than going with a different dental cosmetic procedure.

Dental bonding is designed for small fixes. If you need more extensive work, a different option may be necessary.

Paying for Dental Bonding

Since most dental bonding is designed to improve appearance and therefore is cosmetic in nature, it is not generally covered by dental insurance. When dental bonding is also protective, however, it can be at least partially covered by insurance.

This includes when dental bonding is being used to repair a broken or decayed tooth. If dental bonding is done for structural, restorative, or protective reasons, it can be covered (at least in part) by dental insurance. In these cases, dental insurance may cover 50 to 80 percent of dental bonding costs on average. Check with your insurance provider to determine the specifics of your policy and plan’s coverage options.

Even when dental bonding is not covered through insurance, it can still be discounted if you have a dental discount plan. These plans can help to lower your out-of-pocket costs when using specific providers. Generally, you will pay a monthly or annual fee for one of these plans, but it can save you money down the line.

Many dental offices and providers also offer financing options and payment plans that allow you to pay for dental bonding in installments to help you budget for the costs of the procedure. Different providers and dental offices may offer variable rates, which can be influenced by geographical location and reputation. It can therefore be beneficial to shop around for dental bonding.

Dental Bonding FAQs

Does dental bonding ruin your teeth?

No, cosmetic dental bonding does not ruin your teeth. Even if you get dental bonds for entirely cosmetic reasons and not to fix a chipped or damaged tooth, the bonding should stay in place for several years and continue to look like a healthy, natural tooth.

Make sure you get bonding done by a dentist you trust. Some cosmetic dentistry practices offer “deals” or “coupons” for low-cost bonding. You may not be happy with the results of these offers, and they might not last as long.

There are no major risks with dental bonding, but it is important to keep up a good oral hygiene routine so your teeth stay healthy for as long as possible, including around the dental bond. If you have misaligned teeth, you might not be able to get braces or clear aligners if you have extensive dental bonding. Ask your dentist about this risk and determine if you need orthodontic treatment before getting bonds.

Can dental bonding last forever?

Dental bonding does not last forever, but it does last for a long time if you take care of your teeth. Depending on the quality and material used in bonding, the dental bond can last anywhere from 3 to 10 years.

If you get dental bonding when you are younger, you will need to follow your dentist’s advice to keep your teeth and bond healthy. This way, you won’t likely need to replace the bonding for a long time.

Are there options other than dental bonding?

Your dentist may recommend an option other than dental bonding if you need treatment for non-cosmetic reasons. Dental bonding is used to improve the appearance of stained, misshapen, chipped, cracked, or damaged teeth, so your smile looks more even.

You may benefit more from an implant, which involves removing the damaged tooth and replacing it with an artificial tooth shaped to look like the original tooth. Or, you might benefit from orthodontics like clear aligners, which can move your teeth back into proper alignment, so they look more even and similar in size.

How do I care for bonded teeth?

You care for dental bonding on your teeth just like you would care for your non-bonded teeth. Brush at least twice per day, floss or use interdental brushes at least once per day, and add mouthwash or mouth rinse to help remove more food particles.

Try to avoid too many drinks or foods that might stain your teeth. Your dental bonding will react to coffee, red wine, soy sauce, or other potential staining substances the same as your other teeth.

You may want to avoid toothpastes with grit in them, like activated charcoal or baking soda, which are designed to whiten your teeth by scrubbing stains and particles off them. However, ask your dentist about the best cleaning options for dental bonding, so you know exactly how to keep your smile healthy for longer.

References

Dental Bonding Cost. (2021). CostHelper. Date Fetched: July 2, 2021.

What Can My Dental Insurance Cover? (2021). Cigna- DentalPlans.com, Inc. Date Fetched: July 2, 2021.

Do You Have a Cracked Tooth? (April 2003). American Dental Association. Date Fetched: July 2, 2021.

Adhesive Dentistry: Current Concepts and Clinical Considerations. (December 2020). Journal of Esthetic and Restorative Dentistry. Date Fetched: July 2, 2021.

Disclaimer: This article is intended to promote understanding of and knowledge about general oral health topics. It is not intended to serve as dental or other professional health advice and is not intended to be used for diagnosis or treatment of any condition or symptom. You should consult a dentist or other qualified healthcare provider with any questions you may have regarding a medical condition or treatment.

Back to Dental Restoration articles
TOP

Further Reading

The Cost Of Dental Bonding – How Much Will I Really Pay?

If you’re new to the world of cosmetic dentistry, you may be expecting to pay thousands of dollars to restore your smile and your self-confidence. But did you know that it’s often possible to enhance your smile and appearance for much less?

Dental bonding is the key to this. This effective, versatile, and long-lasting cosmetic treatment is more affordable than you may think. How much does it cost? Find out now in this blog from Bayview Dental.

Dental Bonding Typically Costs Between $100 And $400 Per Tooth

This will vary for each patient, and it may cost more to have your teeth bonded depending on the circumstances. Dr. Youngner will provide you with a more accurate quote and estimate once you come in for a cosmetic consultation.

But, on average, you can expect to pay around $100 to $400 per tooth. The cost mostly varies depending on how much work must be done to the tooth. For example, repairing a very minor chip may cost closer to $100, but reshaping and rebuilding an uneven tooth may be closer to $400.

In addition to this, while bonding is usually considered to be a cosmetic procedure, it is covered by dental insurance in some cases. If you have a chipped tooth, bonding can be used to repair it, and it’s considered a restorative procedure in this situation, so your insurance will usually cover the cost. This varies, though, so make sure to consult with your insurer and your policy for more details. 

Bonding Is An Affordable Cosmetic Dentistry Procedure 

With dental bonding, you don’t have to pay thousands of dollars to restore your teeth. You can improve and enhance your smile for a reasonable price, especially when you compare bonding to other treatments like veneers.

While veneers are very durable, strong, and long-lasting, they do have a steep up-front cost, usually starting at $1,000 at a minimum. They can sometimes cost $2,000 or more. 

Not only that, but bonding is not invasive. It requires no enamel removal, unlike veneers, so it’s technically reversible, though it’s rare for patients to reverse their bonding procedure. For all of these reasons, dental bonding in Center City may be right for you.

Investing In Your Smile Now Saves Money In The Future

Dental bonding can help you save money by preventing further oral health issues. Repairing chipped teeth helps keep them strong, and evenly-spaced teeth are easier to clean, so using bonding to create a more pleasing smile helps you keep your smile healthy.

You’re also more likely to take good care of your teeth when you invest in cosmetic dentistry, so dental bonding in Center City may help reduce your risk of things like cavities and gum disease. So invest in your smile, and consider dental bonding at Bayview Dental.

Contact Bayview Dental For A Cosmetic Consultation In Center City 

Dental bonding is affordable, non-invasive, and offers excellent results if you’d like to restore your smile on a budget. So don’t wait. Contact Bayview Dental online or call us at (651) 243-5999 to schedule a consultation today, explore your options, and see if you’re a good candidate for dental bonding in Center City.

Restoration of a broken tooth

Broken front tooth, chipped – all these problems can occur in any person, both adults and young children, during active games, sports or accidentally when eating solid food. In any case, this defect not only looks unaesthetic, but also allows pathogenic bacteria to enter the resulting cavity and provokes

  • Why teeth break
  • Recovery Methods

A broken front tooth, chips appeared – all these problems can occur in any person, both in adults and in young children, during active games, sports, or accidentally when eating solid food. In any case, this defect not only does not look aesthetically pleasing, but also allows pathogenic bacteria to enter the resulting cavity and provokes the appearance of an infection. The lack of timely medical care can lead to the development of complications. Do not worry and think that the tooth cannot be saved and will have to be removed and prosthetics carried out. Fortunately, now in dentistry there are several ways to restore a broken tooth, which one is right for you, depending on the degree of destruction of the unit of the dentition. Consider all available methods of treatment, their features and cost.

Why teeth break

Most often, it is the front teeth that break, the main cause of this defect is the untimely treatment of caries. Pathogenic bacteria slowly destroy the enamel, over time they can penetrate the pulp and provoke the development of more serious complications. Due to such carious lesions, most of the tooth is destroyed, and in order to restore it, it is necessary to first remove all damaged hard tissues.

Also, the restoration of a broken tooth may be required in case of mechanical injuries (accident, fight, extreme sports). It is also not uncommon for a person to come across hard pieces in food, upon contact with which a piece of a molar or incisor breaks off. Restoration of damaged units of the dentition is recommended, firstly, it is necessary to restore the chewing function, and secondly, it eliminates the aesthetic defect.

When a child broke a milk tooth, what should I do? Many parents delay treatment because They think that he will soon fall out on his own anyway. But this opinion is erroneous, if earlier the milk incisor or molar was immediately removed, now modern dentistry allows you to quickly and effectively restore it. Its absence can cause further incorrect formation of permanent occlusion.

Recovery methods

If you are faced with such a problem as a broken front tooth, you should not postpone treatment until later, take care of your health in a timely manner. Which restoration method to choose depends on the degree of tooth decay and other factors. The specialists of Denteya family dentistry try to preserve and, if necessary, restore the integrity of the damaged units of the dentition. In our clinic, the following methods of restoration of a broken tooth are possible:

Composite restoration

Composite materials are used not only for filling, but also for building hard tooth tissues. They harden and harden when exposed to ultraviolet light. The procedure does not take much time, and the patient receives a beautiful smile in the shortest possible time. The enamel surface is pre-treated, caries and other dental deposits are removed. The specialist selects the shade of the material that matches the color of natural teeth, then he applies the mass in layers on the surface of the unit of the dentition, modeling its shape. Each layer is dried under the lamp. Finally, the finished tooth is polished and ground.

This method is called direct, since all manipulations are performed in one go. Making a broken tooth using composite materials is recommended for young patients. The advantages of the technology are as follows:

  • 1. fast result;
  • 2. affordable cost;
  • 3. no need to grind hard tooth tissues.

With proper and careful care of the restored teeth, it will preserve their original appearance for many years. In order not to damage the cladding, hard toothbrushes and toothpastes with abrasive particles should be abandoned; it is recommended to polish the restored units once a year.

Veneers

Today, veneers are in great demand among patients. They are installed not only in order to restore the integrity of damaged teeth, but also to eliminate many aesthetic defects, such as chips, cracks, darkening of the enamel, etc.

What are these constructs? These are thin ceramic plates that are glued to the front surface of the incisors and canines with a special adhesive. As already mentioned, veneers can correct many imperfections, they are not visible to others, and have a long service life of at least 10-15 years. They are made for each patient individually, first the specialist selects the shade of the plates, then grinds off the top layer of enamel. This condition is mandatory, because veneers are 0.3-0.5 mm thick, and if they are installed on unprepared teeth, they will stand out ugly and interfere. Building a broken tooth with the help of veneer takes some time, this technology is called an indirect method of restoration.

Inserts

If you are faced with such a problem as a half-broken tooth, then the doctor may advise you on tabs. With minor damage to the molars, for their restoration, it is necessary to choose durable materials that can withstand chewing loads. They are also made according to individual casts, and are fixed in the oral cavity with dental cement. The installation of inlays also applies to the indirect method of restoration.

Crowns

In case of serious damage, when the root of the tooth is broken, what should patients do in this situation? The installation of crowns will help hide the defect and restore the functionality of the dental system.

Which restoration method is right for you, only a doctor can determine. To do this, you need to consult with a specialist and undergo an examination. On the website of Denteya Family Dentistry, you can find the price list and make an appointment.

modern methods, advantages and disadvantages of different methods

01/22/2019

Modern dentistry offers various methods for correcting chips, cracks and other defects in the dentition. One of the popular solutions is extension, which allows the tooth to return to its original color and shape. What is the procedure and who is it suitable for – you will learn about this from our article.

  • What is tooth augmentation?
  • Indications and contraindications for procedure
  • Advantages and disadvantages of tooth extensions
  • Basic methods
    • Filling
    • Veneers
    • Placement of crowns
    • Extension on pin
  • Choice of tooth augmentation technique
  • Cost of procedures

What is dental augmentation?

Tooth augmentation is a dental procedure that allows you to restore the appearance of dental units and restore their lost functionality. A type of extension is artistic restoration – a technique for restoring the front teeth.

Both procedures are performed using special materials that are visually similar to the texture of natural enamel. The restored unit has the same shade and relief as natural dental tissues, is highly durable and lasts for at least 10 years.

Indications and contraindications for the procedure

Building is indicated in the following cases:

  • Chips and cracks on the tooth surface.
  • Enamel decay or discolouration that cannot be removed by bleaching.
  • Partial loss of a tooth due to trauma or caries.
  • Malocclusion.
  • Interdental gaps.
  • Age-related wear of enamel, in which the tooth unit darkens and becomes sensitive to external influences.

However, restorations are not suitable for every patient. It cannot be performed if one of the following contraindications is present:

  • Untreated caries or gingivitis.
  • Severe systemic diseases, such as blood disorders or diabetes mellitus.
  • Some mental disorders.
  • Bruxism.
  • Bruxism. Individual intolerance to the components of the filling composite.

There are also technological limitations: if it is impossible to protect the surface being restored from contact with moisture (for example, saliva), then the build-up will have to be abandoned – the filling will not harden. Also, some methods cannot be used for dental treatment in children – for example, they are not installed with pins. For the majority of patients, augmentation remains the best solution for restoring a lost tooth fragment.

Advantages and disadvantages of tooth extensions

In dentistry, various methods of restoring lost tooth fragments are used, but for most patients, doctors recommend paying attention to extensions. This is due to the numerous advantages of the procedure:

  • Large selection of technologies and materials that allow you to choose the best solution for each person and restore both anterior and posterior teeth.
  • High aesthetic result.
  • Restoration does not affect adjacent (healthy) units, does not increase the chewing load, that is, it protects the dentition from accelerated wear and destruction.
  • Minimally traumatic: the tissues of the oral cavity heal quickly without causing significant discomfort to the patient.
  • The materials used during the extension are durable, aesthetic, do not change color and strength during use.

Teeth augmentation is practically devoid of disadvantages. The only drawback is the rather high cost of services, but it can be adjusted by choosing simpler methods of restoration and more affordable materials.

Basic methods

There are several methods of building up teeth, differing in technology, compositions used, price. The main methods include:

  • Sealing.
  • Installation of veneers.
  • Installation of crowns.
  • Extension on pin.

Each method has its own advantages and disadvantages, which are described below.

Filling

Filling is one of the easiest and most affordable ways to build up a tooth, provided that the bone tissue is preserved. The dentist chooses the shade of the composite that is as close as possible to the natural color of the patient’s enamel. Then the composition is applied in layers on the dental unit, due to which a monolithic structure with a tooth is formed. The filling hardens under the influence of light – it quickly gains strength and practically does not wear out over time. The top layer is polished and varnished, due to which it repeats the natural relief of dental tissue as accurately as possible.

Key benefits of a filling:

  • Nerve preservation.
  • The ability to restore both minor defects and severe damage.
  • High speed of the procedure – you can restore a tooth in one visit to the dentist.

The disadvantages include the fact that the aesthetics of the restored tooth directly depends on the skill of the dentist, who must give it the most natural shape. There is almost always a risk that the filling will look less natural than the “native” hard tissues of the unit.

Installation of veneers

Another way to increase the dentition is to install veneers. They are thin porcelain microprostheses that mimic the front surface of the tooth. Overlays allow you to hide discoloration, traces of enamel destruction, gaps and make your smile attractive.

The service life of the plates is 10-15 years, during which they do not change color even with frequent use of coloring products (berries, wine, coffee). But dental porcelain can crack under high loads and direct impacts.

Before installing the veneer, the tooth is prepared – the top layer of enamel is removed. Then a plate is applied and fixed with dental cement. This extension technology is used for the restoration of only the front teeth. Among the main advantages of the technique are:

  • High aesthetics.
  • Long service life of structures.

The disadvantages include the need to remove the top layer of enamel. This can be avoided by installing lumineers – even thinner micro-prostheses that are fixed directly on the tooth surface without its preliminary preparation (turning).

Placement of crowns

Crowns are metal, ceramic or metal-ceramic caps that imitate the surface of one or more dental units. The installation of crowns allows you to compensate for serious defects – for example, chips or the complete absence of several teeth, to restore beauty and functionality to the dentition.

The prosthesis is made in a dental laboratory according to a previously taken impression, so it fits the patient perfectly. Before building up the teeth, the oral cavity is sanitized, the nerves are removed and the units on which the crown will be put on are turned. The procedure requires multiple visits to the dentist.

Modern ceramic and metal-ceramic crowns restore aesthetics to the smile. The material imitates the shade of enamel, does not absorb food colorings, and does not wear out during use. The service life of crowns depends on the manufacturing technology and averages 10 years or more. The main advantages of this extension technique:

  • Possibility of restoration of both anterior and chewing teeth.
  • Restoration of dental units with partial or complete adentia.
  • High aesthetic result.

Among the shortcomings is the rather high cost of the procedure. However, the price can be reduced by using more affordable materials in the process of making crowns.

Post extension

Post extension or pinning is recommended by the dentist if the hard tissues of the tooth are destroyed but the root is not damaged. During the procedure, a rod is screwed into the jaw – a pin, on which a temporary crown is put on.

After the surrounding tissues have healed, the temporary crown is replaced with a permanent one. Advantages of this extension method:

  • Possibility of restoring both front and back teeth.
  • A wide variety of post materials allows the patient to influence the cost of the restoration in the direction of its reduction.
  • Long implant life.

The disadvantages usually include the need to restore tissue after implantation of the rod, during which a person experiences some discomfort (inflammation and swelling of the gums). Also, a rather high price of extension per pin can be considered a disadvantage.

Choice of tooth augmentation technique

It is possible to choose the optimal method of tooth augmentation only after consultation with a dentist. The doctor will assess the degree of destruction of the dental unit, check the safety of the root and nerve, and, depending on this, recommend a suitable method of restoration.

For example, veneers or lumineers are most often used to repair minor damage to incisors and canines. They hide visual defects, align the dentition, return the lost whiteness to the unit.

If the hard tissues of the tooth are seriously damaged, then crowns or post extensions should be used. In this case, you can completely restore the unit and return its functionality.

In consultation with a dentist, it is necessary to clarify:

  • The service life of the restored tooth, its resistance to wear, food coloring, the possibility of restoration in case of chipping. For example, some crowns can be re-polished if minor defects appear; reinstallation of the micro-prosthesis is not required.
  • The number of procedures for which it will be possible to build up a tooth. The fastest options are filling and installation of lumineers. The use of other technologies will require several visits to the clinic.
  • Tissue healing rate. Some extension methods allow you to restore the tooth without damaging the gums. This guarantees the patient minimal discomfort after the procedure.

Different types of extensions differ from each other in price, which must be taken into account when choosing a technique.

Cost of procedures

Prices for dental extensions vary depending on:

  • Number of units to be restored.
  • The severity of the defect.
  • Selected extension technique.
  • Materials used.

Also, the cost is affected by the condition of the oral cavity, the preservation of the tooth root, the need for preliminary sanitation and other procedures.